ZexisStryfe: Created page with "-- local dpl = {} dpl.pipe = '¦' local dataContentMarker = '`#@@#`' local usesInclude = {} -- Custom function for splitting a string because mw.text.split() is waa..."

2020-10-16T16:24:11Z

Created page with "-- <nowiki> local dpl = {} dpl.pipe = '¦' local dataContentMarker = '`#@@#`' local usesInclude = {} -- Custom function for splitting a string because mw.text.split() is waa..."

New page

-- <nowiki>
local dpl = {}

dpl.pipe = '¦'
local dataContentMarker = '`#@@#`'
local usesInclude = {}

-- Custom function for splitting a string because mw.text.split() is waaay too slow
local function split( str, pattern, plain )
local res = {}
continue = true
local startIndex = 1

while continue do
local i, j = string.find( str, pattern, startIndex, plain )
if i then
table.insert( res, string.sub( str, startIndex, i-1 ) )
startIndex = j + 1
else
table.insert( res, string.sub( str, startIndex ) )
continue = false
end
end

return res
end

-- Also custom function for speed
local function trim( str )
return string.match( str, '^%s*(.-)%s*$' )
end

local escapeChars = {
['{'] = '{',
['\180'] = '{', -- Wtf dpl...
['}'] = '}',
['\181'] = '}',
['['] = '[',
[']'] = ']',
['|'] = '|',
['-'] = '‐',
['\226'] = '',
['\157'] = '',
}
local function escape( str )
-- the \226\157\180\181 are used to match ❴ (U+E29DB4) and ❵ (U+E29DB5) wich are 3 bytes long so
-- we can't use them directly inside [] patterns. Ustring would fix this but it's way too slow.
str = string.gsub( str, '[{}%[%]|%-\226\157\180\181]', escapeChars )
return str
end

local unEscapeChars = {
['{'] = '{',
['}'] = '}',
['['] = '[',
[']'] = ']',
['|'] = '|',
['‐'] = '-'
}
local function unEscape( str )
str = string.gsub( str, '&#%d+;', unEscapeChars )
return str
end

local function removeFormattingSettings( query )
local toRemove = {
'mode',
'table',
'tablerow',
'tablesortcol',
'headingmode',
'headingcount',
'listattr',
'itemattr',
'hlistattr',
'hitemattr',
'userdateformat',
'shownamespace',
'escapelinks',
'titlemaxlength',
'replaceintitle',
'columns',
'rows',
'rowsize',
'rowcolformat',
'resultsheader',
'resultsfooter',
'oneresultheader',
'oneresultfooter',
'noresultsheader',
'suppresserrors',
'noresultsfooter',
'format'
}

for _, k in ipairs( toRemove ) do
query[k] = nil
end
end

local function formatInclude( query )
query = split( query, ',', true )
local count = #query

for i = 1, #query do
if query[i]:match( '%b{}' ) then -- Check if we are including a template
local templateName, params = query[i]:match( '{(.-)[¦|}]([^,]*)' )
if params:find( '%S' ) then
params:gsub( '^:%-', '' )
query[i] = string.format( '{%s}%s', templateName, params )
for _ in params:gmatch( ':' ) do
count = count + 1
end
else
query[i] = string.format( '{%s¦DPLlua helper}', templateName ) -- Use a helper template to get all the parameters of our included template
end
end
end

return table.concat( query, ',' ), count
end

local function formatDpl( query )
local queries = {}
local count = query.count or 500
local offset = query.offset or 0
local _usesInclude = false
query.count = nil
query.offset = nil

-- We use table format when the include parameter is used to make sure we can
-- differentiate between the results in case more than one item is included
local dplStringInclude =
[=[
{{#dpl:
|noresultsheader = @@
|count=%s
|offset=%s
|%s
|table=,
|tablerow=%s
}}]=]

-- Table format requires an include statement so we use format instead.
-- This is also a lot faster than adding an empty include statement
local dplStringNoInclude =
[=[
{{#dpl:
|noresultsheader = @@
|count=%s
|offset=%s
|%s
|format=,¦-¦[[%%PAGE%%¦]],,
}}]=]

-- Auto generate more than one dpl if count > 500
-- The results of these are later combined
for i = 1, math.ceil( count / 500 ) do
local params = {}
local includeCount = 0

for k, v in pairs( query ) do
if k == 'include' then
v, includeCount = formatInclude( v )
_usesInclude = true
end
table.insert( params, k .. '=' .. tostring( v ):gsub( '|', '¦' ) )
end

if _usesInclude then
table.insert( queries, string.format(
dplStringInclude,
count > 500 and 500 or count,
offset,
table.concat( params, '\n|' ),
string.rep( dataContentMarker..'%%'..dataContentMarker..',', includeCount )
) )
else
table.insert( queries, string.format(
dplStringNoInclude,
count > 500 and 500 or count,
offset,
table.concat( params, '\n|' )
) )
end

count = count - 500
offset = offset + 500
end

table.insert( usesInclude, _usesInclude )

return table.concat( queries )
end

local function toTable( query )
local _usesInclude = table.remove( usesInclude, 1 )
local res = {}

query = query:gsub( '<p>Extension:DynamicPageList .-</p>', function(item) res.error = item; return '' end)

if not query:match( '^@@' ) then -- @@ is used when no result is found
if _usesInclude then
query = query:gsub( '\127\'"`UNIQ%-%-nowiki%-%x+%-QINU`"\'\127', function(item) return '<nowiki>' .. mw.text.unstripNoWiki( item ) .. '</nowiki>' end )
query = query:gsub( dataContentMarker..'(.-)'..dataContentMarker, escape )
query = query:gsub( '{|.-|%-', '') -- Remove the header of the table
-- Replace the footer of the table width a row indicator. This effectively
-- combines the output of multiple dpl queries when count > 500
query = query:gsub( '|}', '|-' )
end

query = trim( query )
query = split( query, '|-', true ) -- Results of the returned pages are separated by |-

for _, v in ipairs( query ) do
if v:match( '%S' ) then
v = trim( v )
local title = v:match( '^|%[%[(.-)|' )
local dataList = v:match( '^|.-|.-|(.*)' ) -- This is everything after the title

if not _usesInclude then
if title and title ~= '' then
table.insert( res, title )
end
else
-- When multiple includes are used (e.g. include={Template1},{Template2}) its results are separated by a pipe
dataList = split( dataList, '|', true )
local _dataList = {}

for _, dataItem in ipairs( dataList ) do
dataItem = unEscape( dataItem )
-- When we include an entire template we use the %ARGS% parameter supplied by dpl.
-- However all | characters are repaced with §, e.g.:
-- §nameLessParam
-- §param = text [[wowee§link text]]
-- §param2 = text {{something§something else}}
dataItem = dataItem:gsub( '%b{}', function(x) return x:gsub( '§', '|' ) end ) -- Restore pipe characters inside links and templates
dataItem = dataItem:gsub( '%b[]', function(x) return x:gsub( '§', '|' ) end )
dataItem = trim( dataItem )

if dataItem:match( '§' ) then -- Check if we included a template
dataItem = split( dataItem, '§', true )
local _dataItem = {}

for i, item in ipairs( dataItem ) do
if i ~= 1 then -- skip first item as it is a false empty string created by splitting on § when the string started with a §
if item:find( '=' ) then -- Check if the parameter is named or unnamed
local param, value = item:match( '^%s*(.-)%s*=%s*(.-)%s*$' )
_dataItem[ param ] = value
else
table.insert( _dataItem, trim( item ) )
end
end
end

dataItem = _dataItem
end

table.insert( _dataList, dataItem )
end

if title and title ~= '' then
table.insert( res, { title=title, include=_dataList } )
end
end
end
end
end

return res
end

-- Accepts a series of tables each containig the settings for a dpl query.
-- Combinig multiple dpl queries yields better performance than doing them sequentially
function dpl.ask( ... )
local queries = { ... }

for i = 1, #queries do
removeFormattingSettings( queries[i] )
queries[i] = formatDpl( queries[i] )
end

queries = table.concat( queries, '$@µ@$' )
local time = os.clock()
queries = mw.getCurrentFrame():preprocess( queries )
time = os.clock() - time
queries = split( queries, '$@µ@$', true )

for i = 1, #queries do
queries[i] = toTable( queries[i] )
queries[i].time = time
end

return unpack( queries )
end

return dpl
-- </nowiki>

Module:DPLlua - Revision history

ZexisStryfe: Created page with "-- local dpl = {} dpl.pipe = '¦' local dataContentMarker = '`#@@#`' local usesInclude = {} -- Custom function for splitting a string because mw.text.split() is waa..."